1976 Porsche 911 Restoration of Your Ignition Distributor, 2.7L Carrera MFI

Product Description:

Restoration Service for YOUR Bosch® Ignition Distributor, Carrera 2.7 L MFI
Send your distributor to us for restoration.

This is a restoration service for your Ignition Distributor, for 2.7L Carrera MFI models 1973-76 using the Bosch 0231.184.004 distributor. (These cars may also be using a Bosch 0231.169.011 distributor.) 

Your ignition distributor will be completely disassembled, media blasted and polished. All new bushings, sliding surface, and shims are installed, along with a new spring package. We ensure that vertical and lateral play are within appropriate levels for proper operation and to avoid excessive wear. The restoration also includes new cap, rotor, points, condenser, and seals.

If you would also like new hold-down clips for the cap, please add two of 901.602.965.00 to your order.  If your pinion gear needs replacing, we have these available separately.

Your rebuilt unit is tested on a Sun distributor machine, and adjusted as needed to bring it within factory specs. Actual performance specs / curves are printed and included with the returned unit. The restored distributor is ready to install and set timing. We also include a free download of our TSB for Porsche CDI ignition systems.

We will need your distributor for about 4-7 weeks to complete the work. Turnaround time varies with condition of all components and shop workload.

NOTE:  Vacuum advance cans are not part of the rebuild service;  if there is a problem with your vacuum can, we will contact you. Not all cores are rebuildable.  Damaged cores may require machining and/or parts not covered by this service; if that is the case we will let you know. 

Please carefully pack your distributor, write your online order number on the outside of the box, and send to:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY  12533

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of OEM and aftermarket parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. 

Reviews and Ratings:

• 1973 Porsche 911
• 1974 Porsche 911
• 1975 Porsche 911
• 1976 Porsche 911

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.