1965 Porsche 911 Restoration of Your Ignition Distributor, Cast Iron “006”

Product Description:

Restoration Service for YOUR Bosch® Ignition Distributor
Send your Bosch 0.231.121.006 distributor to us for restoration.
No time? See "Related Products" on this page for new distributor option.

This is a restoration service for your Bosch® Ignition distributor model 0.231.121.006, used on Porsche 911 models in 1964-1965.

Your distributor will be completely disassembled, media blasted, and polished. All new bushings, sliding surface, and shims are installed, along with new springs. The restoration also includes new cap, rotor, points, condenser, seal, and hardware. We rebuild your distributor to factory specifications, and test it on a Sun distributor machine. Final test results are printed out for you, and the rebuilt distributor is delivered ready to install and set timing.

If you would also like new cap hold-down clips, please see part number 901.602.965.00. We also have new drive gears available if needed.

This is a thorough restoration, and we will need your distributor for around 4-7 weeks. Turnaround times vary based on shop workload and the condition of all components. Not all cores are rebuildable. Damaged cores may require machining and/or parts not covered by this service.

Please send your well packed distributor, with order number on the outside of box, to:

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of OEM and aftermarket parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. 

Reviews and Ratings:

• 1965 Porsche 911

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.