Restoration of Your Ignition Distributor, 911SC Euro

Product Description:

Restoration Service for YOUR Bosch Distributor
Send your Bosch 0.237.301.007 distributor to us for restoration
No time? See "Related Products" on this page for new distributor option.

When you send us your Bosch 0.237.3001.007 ignition distributor, it will be completely disassembled, media blasted, and polished. All new bushings and shims are installed, along with new springs. The restoration also includes new cap, rotor, seals, gear pin, and hardware.

We make all necessary adjustments to ensure your distributor is operating within factory specs and tolerances. Your rebuilt distributor is then tested on a Sun distributor machine, and printed results are provided to you.

If you would like new cap hold-down clips for your restored distributor, please see part number 930.602.965.00. We also have new drive gears and impulse windings if yours need to be replaced.

Please Note: this service does not include the vacuum can. If your vacuum can is not re-usable then we will have to contact you for options. Not all distributor cores are rebuildable. Damaged cores may require machining and/or parts not included with this service; if that is the case we will contact you.

This is a thorough restoration and we will need your distributor for approximately 4-7 weeks to complete the work. Turnaround times will vary with shop workload and condition of all components.  

Please send your well packed distributor, with your online order number on the the outside of the box, to:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of OEM and aftermarket parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. 

Reviews and Ratings:

• 1978 Porsche 911SC
• 1979 Porsche 911SC

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.