CDI Ignition Coil - New, Scratched

Product Description:

CDI Ignition Transformer  
This is a new CDI coil with scratches in the paint.
Damage is shown in photos, and is completely cosmetic.
Review all photos before ordering.

We have developed this coil to work with the Porsche CDI system and give you the strongest, cleanest spark. This coil is designed to replace the 901.602.502.00 Bosch coil. Our coil comes with decals and post hardware, as well as a free CDI System TSB download. Bracket is also included.

Capacitor Discharge Ignition systems use a transformer, aka the CDI coil. It has a turns ratio of 100 to 1 so the voltage going in is multiplied 100 times to give you the voltage needed for the Porsche CDI system. These are high-energy systems and therefore extremely dangerous. If you are not trained to work on these systems, bring your vehicle to a professional, fully insured Porsche mechanic who is.

We stand behind our coil with a 12 month replacement guarantee when used within Porsche factory specifications for the complete system, using a Bosch or our CDI unit, solid core factory ignition wires, and the correct spark plugs. Factory resistance values on plug wire connectors, rotor, and cap-to-coil wire must be maintained. Many replacement parts fail to meet factory specs. Contact us for additional information.


PLEASE NOTE:
CDI systems often fall out of spec over the years. Incorrect resistance values, insufficient connections and grounds, bad wiring, and incorrect replacement components are a few of the culprits. In time, these conditions can and do cause premature, sudden, and inconvenient component failure!

Consult your Porsche factory shop manual for proper specifications and installation info, or seek out a Porsche specialist who uses factory shop manuals and is capable of fully diagnosing the entire ignition system.  An oscilloscope is an essential tool for troubleshooting a CDI system. We recommend checking out the oscilloscope blog at www.klassikats.com for a few examples.

If you replace a bad coil without ensuring your CDI system is free of issues, you may find yourself replacing the coil again, regardless of brand. Call or email us at Partsklassik for further information.

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of OEM and aftermarket parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. 

Reviews and Ratings:

• 1969 Porsche 911
• 1970 Porsche 911
• 1972 Porsche 911
• 1973 Porsche 911
• 1974 Porsche 911
• 1975 Porsche 911
• 1976 Porsche 911
• 1977 Porsche 911
• 1978 Porsche 911SC
• 1979 Porsche 911SC
• 1980 Porsche 911SC
• 1981 Porsche 911SC
• 1982 Porsche 911SC
• 1983 Porsche 911SC
• 1970 Porsche 914/6
• 1971 Porsche 914/6
• 1972 Porsche 914/6
• 1973 Porsche 914/6
• 1974 Porsche 914/6
• 1975 Porsche 914/6
• 1976 Porsche 914/6
• 1975 Porsche 930
• 1976 Porsche 930
• 1977 Porsche 930
• 1978 Porsche 930
• 1979 Porsche 930
• 1980 Porsche 930
• 1981 Porsche 930
• 1982 Porsche 930
• 1983 Porsche 930
• 1984 Porsche 930
• 1985 Porsche 930
• 1986 Porsche 930
• 1987 Porsche 930
• 1988 Porsche 930
• 1989 Porsche 930

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.