Distributor Rebuild Kit, 0.231.159.007, Without Cap/Rotor

Product Description:

Distributor Re-Build Kit for 0.231.159.007
Excludes Cap and Rotor

Due to the high and escalating cost of caps & rotors, we offer this kit for the 0.231.159.007 distributor without cap or rotor. This lets you choose your own brand of cap and rotor, or use ones that you already have.

This kit is for Bosch distributors with number 0 231 159 007 on the side; it's the distributor for the 911S from 1969-71. The kit includes points, springs, bushings, shims, seals, hardware, gear pin, and felt dot.

New cap hold-down clips are available; please see part number 901.602.965.00. Drive gears are available too.

This kit is intended for the professional rebuilder who has the tools and skills to install the bushings and ream them to fit the shaft, and who has a distributor machine to set the unit up after rebuild. Severe damage may be inflicted on the ignition distributor and the engine if the distributor is improperly rebuilt, set up, or installed.  

Instructions and diagrams aren't included. If you feel you need instructions, please let us rebuild your distributor or take it to an experienced rebuilder.

We do not offer partial kits, but we do sell many individual parts for the Bosch and Marelli distributors on Porsche models.

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of OEM and aftermarket parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. 

Reviews and Ratings:

• 1969 Porsche 911
• 1970 Porsche 911

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.