Restoration of Your Ignition Distributor, 911SC USA

Product Description:

Restoration Service for YOUR Distributor,
Bosch 0237.304.016 for 911SC USA 1980-83
Send your distributor  to us for restoration.
Turnaround is ~5-7 weeks depending on condition /workload.
No time? See "Related Products" on this page for new distributor.
Verify Engine Code 930/ 07, 08, 16, 17

When you send your distributor to us, it will be completely disassembled, media blasted, and polished. All new bushings and shim kit are installed, along with a new spring package, seals, cap, and rotor.

During the rebuild, vertical and lateral play will be adjusted to within recommended limits, and the distributor will be returned to factory operating specifications. The rebuilt distributor is tested on a Sun distributor machine. Test results / curves are included in the box with your rebuilt unit.

If you would like new cap hold-down clips, please add 2 of part number 930.602.965.00 to your order.  We also have new pinion gears and impulse generator windings if you want or need to replace those.

Please Note: Not all cores are rebuildable. We sometimes receive cores with damaged or missing parts that are no longer available. Examples include, but are not limited to, main shafts, magnets, housings, etc.

This service does not include repair or replacement of the vacuum can. If your vacuum can is not re-usable then it will need to be replaced.  Another alternative is our new Bluetooth programmable distributor, already pre-programmed for a stock 1980-83 USA 911 SC engine.

After checking out, please send your well-packed core, with online order # on outside of box, to:

Partsklassik
827 State Route 82, 
Suite 10251
Hopewell Junction, NY 12533

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of OEM and aftermarket parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. 

Reviews and Ratings:

1 Customer Review(s)

5 Star

1  (100%)

4 Star

0  (0%)

3 Star

0  (0%)

2 Star

0  (0%)

1 Star

0  (0%)

Please login first to write a review.

Overall

Value

Performance

Always on point one of the few suppliers we have that a supply what they preach!cc rare in the porsche trade

Reviewed by Randy  M

4/3/2019 10:02:52 AM

• 1980 Porsche 911SC
• 1981 Porsche 911SC
• 1982 Porsche 911SC
• 1983 Porsche 911SC

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.