Restoration of Your Ignition Distributor, 2.0/2.2 911E MFI

Product Description:

Restoration Service for YOUR Bosch® 911E Ignition Distributor
Send your Bosch® model 0.231.159.006 distributor to us for restoration. 
No time? See "Related Products" on this page for new distributor option.

Your ignition distributor will be completely disassembled, media blasted, and polished. All new bushings, sliding surface, and shim kit are installed, along with a new spring package. This restoration also includes a new cap, 6500 rpm limiting rotor, points, condenser, and shaft seal.

Our rebuild process ensures that the play is within acceptable limits and that the distributor performs to factory specifications. Your rebuilt distributor is then tested using our Sun tester, and adjusted as needed. Final test results and curves are printed and included. The unit is delivered to you ready to install and set timing.

If you would like new cap hold-down clips, please add two of part number 901.602.965.00 to your order. We also have new drive gears available if you want or need to replace yours.

This is a thorough restoration and we will need your distributor for about 4-7 weeks.. Actual turnaround times vary based on shop workload and the condition of all the distributor‘s parts. Distributors with a high degree of damage or with missing parts may not be rebuildable, or may require additional labor and parts beyond the scope of this service. If that is the case, we will contact you.

Please send your well packed distributor core to:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of OEM and aftermarket parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. 

Reviews and Ratings:

• 1969 Porsche 911
• 1970 Porsche 911

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.