1984 Porsche 930 Ignition Rotor for 3.2 Carrera, 911SC, 930

Product Description:

Ignition Rotor
Bosch® ignition distributor rotor.
This rotor is not rev limiting.
For 1984-89 Porsche 3.2L Carrera.
Has also replaced original 911SC and 930 rotors.*

*This rotor has replaced the original rotor used in the 911SC models and 930 models. When using this rotor on the 1978-83 Porsche 911SC or the 1978-94 Porsche 930 models that have a 6 Pin CDI, you must use a 5K resistor in the coil wire. Failure to use the 5K resistor will result in CDI coil and CDI box damage/failure. The 5 k resistor is available from us under part number 122.035.281.5

Manufacturer Information:

Bosch
Bosch parts are available for almost all vehicle types in ex-works quality. This means that spare parts from Bosch have the same first class quality as those fitted in your car by the manufacturer. We use Bosch in preference to other brands when available.

Reviews and Ratings:

• 1985 Porsche 911 Carrera
• 1986 Porsche 911 Carrera
• 1987 Porsche 911 Carrera
• 1988 Porsche 911 Carrera
• 1989 Porsche 911 Carrera
• 1978 Porsche 911SC
• 1979 Porsche 911SC
• 1980 Porsche 911SC
• 1981 Porsche 911SC
• 1982 Porsche 911SC
• 1983 Porsche 911SC
• 1978 Porsche 930
• 1979 Porsche 930
• 1980 Porsche 930
• 1981 Porsche 930
• 1982 Porsche 930
• 1983 Porsche 930
• 1984 Porsche 930
• 1985 Porsche 930
• 1986 Porsche 930
• 1987 Porsche 930
• 1988 Porsche 930
• 1989 Porsche 930

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.