Part#: 930.609.050.12
Availability: Out of Stock
Ignition Wire Set Twin Plug, 4000Ω This wire set is for Porsche® vehicles with 6 Pin CDI and twin plug ignition. It includes spark plug connectors as well as cap connectors that are not installed until you route the wires. When you are ready to install the cap connectors, simply insert the flush-cut wire into the connector and twist until you can tug on the wire without it coming loose. This set has 4000Ω of resistance per plug wire and 6000Ω on the cap-to-coil wires, for 10,000 ohms total per plug. These resistance values are key to correct operation of the entire ignition system. Too little resistance will result in energy moving too quickly and erratically, resulting in system damage and failures. Too much resistance will reduce spark energy and burn times. This set is designed to give you the best spark energy and burn times at the plug without compromising the vehicle's electrical system. Avoid resistance-per-foot wires when running any Porsche CDI ignition. If the wires are different lengths, they will have inconsistent resistance values, resulting in poor performance and potential damage. This set uses resistance in the connectors only.
Aftermarket Our founders have worked on Porsche cars for decades. They've tried most of our aftermarket products first hand on real cars. Some parts are no longer made by an O.E.M company, or the price difference between genuine and aftermarket has become so large that it makes sense to take the savings. If you have any questions about an aftermarket product, please contact us.
All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days. Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts. Returns (except warranty) won't be accepted if the part: - Has been installed, used, damaged, is dirty or incomplete - Is not sellable as new - Arrived in sealed packaging that has been opened - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order - Was purchased more than 30 days earlier Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.