1967 Porsche 912 Wheel Stud, 52 mm Bullet Nose

Product Description:

Wheel Stud, 52 mm Bullet Head
These are an extended stud that will allow you to use wheel spacers or a different thickness wheel. The bullet nose on the stud adds to the overall length of the stud and is not considered in the 52 mm measurement. The bullet nose makes for faster wheel changes if you are using the car for racing.

These wheel studs are manufactured out of heat-treated medium carbon alloy steel. The studs are cold-headed and thread rolled for an entirely cold formed stud that meets or exceeds SAE Grade 8 bolt standards. Cold formed studs have an uninterrupted grain flow, meaning the grain lines of the steel are compacted to follow the geometry of the stud. This results in a strength advantage over machined studs.

Sold per each.

Manufacturer Information:

Sway-A-Way torsion bars are a high-performance direct replacement for your stock bars, available in a wide range of diameters to allow you to choose the right spring rate for your application. The bars are made with heat-treated aircraft grade alloy steel and centerless ground for vastly improved durability and consistent spring rate.

Torsion bars are:
     Manufactured from solid aircraft grade alloy steel
     Heat treated for increased strength
     Centerless ground for consistent outside diameter and rate
     Powder coated to resist corrosion

Reviews and Ratings:

• 1965 Porsche 911
• 1967 Porsche 911
• 1968 Porsche 911
• 1969 Porsche 911
• 1970 Porsche 911
• 1972 Porsche 911
• 1973 Porsche 911
• 1974 Porsche 911
• 1975 Porsche 911
• 1976 Porsche 911
• 1977 Porsche 911
• 1985 Porsche 911 Carrera
• 1986 Porsche 911 Carrera
• 1987 Porsche 911 Carrera
• 1988 Porsche 911 Carrera
• 1989 Porsche 911 Carrera
• 1978 Porsche 911SC
• 1979 Porsche 911SC
• 1980 Porsche 911SC
• 1981 Porsche 911SC
• 1982 Porsche 911SC
• 1983 Porsche 911SC
• 1965 Porsche 912
• 1966 Porsche 912
• 1967 Porsche 912
• 1968 Porsche 912
• 1969 Porsche 912
• 1976 Porsche 912E
• 1970 Porsche  914
• 1971 Porsche  914
• 1972 Porsche  914
• 1973 Porsche  914
• 1974 Porsche  914
• 1975 Porsche  914
• 1976 Porsche  914
• 1970 Porsche 914/6
• 1971 Porsche 914/6
• 1972 Porsche 914/6
• 1973 Porsche 914/6
• 1974 Porsche 914/6
• 1975 Porsche 914/6
• 1976 Porsche 914/6

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.