1980 Porsche 911SC Exchange your 1978-83 Oil Pump for Rebuilt, High Volume Pump

Product Description:

Oil Pump Exchange
High Volume Rebuilt Oil Pump, 1978-83
Aluminum Body, 4 Rib

This is an Exchange. Please send in your core first.

This rebuilt pump has undergone a complete housing polish and throating operation. This significantly increases the flow rates, so much so that the oil system in the case must be modified to prevent it filling with too much oil. For details of the required modification, please email us or speak to the machine shop doing the case work. 

The pump housings are also machined to close the end clearances, correcting for normal wear and tear. The gears are cleaned, media tumbled, inspected and replaced if required. They are then coated to improve the running life of the gear.

This pump will fit Porsche® 911SC 3.0L models, 1978-83. We have also found these pumps installed in some earlier 911 engines. Please make sure your pump matches the picture, as we must receive a like-for-like core unless you contact us in advance to make other arrangements. 

Not all cores are rebuildable. Pumps that are damaged beyond repair cannot be accepted for exchange. We typically need several days to inspect and confirm your core, and this varies with shop workload and the core's condition.

Please drain your pump, seal it in a bag or container, and pack it carefully into a sturdy box. Send it to us at:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533

Manufacturer Information:

Original Equipment Manufacturer, O.E.M
The company that made the parts for Porsche.

Reviews and Ratings:

• 1978 Porsche 911SC
• 1979 Porsche 911SC
• 1980 Porsche 911SC
• 1981 Porsche 911SC
• 1982 Porsche 911SC
• 1983 Porsche 911SC

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.