1978 Porsche 911SC Exchange your 1975-77 Oil Pump for Rebuilt, High Volume Pump

Product Description:

Oil Pump Exchange
High Volume Rebuilt Oil Pump, 1975-77
Magnesium Body, 4 Rib

Exchange your original oil pump for our rebuilt high volume unit. Please send your matching core to us first. We require about a week to get a 4 rib core inspected before we ship.

This rebuilt pump has had a complete housing polish and throating operation which significantly increase the flow rates, so much so that the oil system in the case will have to be modified to prevent the case filling with too much oil. For details of the required case modification, please email us or speak to the machine shop doing the case machine work. 

The pump housings are also machined to close the end clearances to correct for normal wear and tear. Gears are cleaned, media tumbled, inspected and replaced if required, then are coated to improve the running life of the gear.

Not all cores are rebuildable.  If your pump is damaged beyond repair, it cannot be accepted for exchange.

Although these pumps are used in 1975-77 model engines, we have also found them installed in some 1978 3.0L 911SC model engines. This is not a problem of function or fit. However, please make sure yours matches the picture above before you order, as we need a like-for-like core.

Send your core to:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533

Manufacturer Information:

Original Equipment Manufacturer, O.E.M
The company that made the parts for Porsche.

Reviews and Ratings:

• 1976 Porsche 911
• 1977 Porsche 911
• 1978 Porsche 911SC
• 1975 Porsche 930
• 1976 Porsche 930
• 1977 Porsche 930

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.