1988 Porsche 911 Carrera Basic Overhaul Parts Set, Weber IDA IDS

Product Description:

Weber Replacement Parts Set
One set needed per carburetor.
Pair this set with our Weber Master Gasket Kit.

The parts in this set should be replaced on every rebuild of Weber 3- Barrel carbs (IDA, IDS, IDAP, etc). Why? Bowl plugs, needle/seat plugs, and main jet holders tend to snap or leak due to age, corrosion, and over-torquing by prior technicians. Fuel inlet strainers disintegrate over time and contaminate the carbs. Then there are common wear points, like the pump lever at the throttle shaft.

We've created this Parts Kit to supplement our Weber Master Gasket Kit.
Each kit covers one carburetor and includes:

    2x  Needle & Seat Plug (with Seal Ring)
    2x  Float Bowl Plug (with Fiber Washer)
    3x  Main Jet Holder (with Seal Ring)
    3x  Mixture Screw
    3x  Mixture Screw Spring
    2x  Fuel Inlet Strainer
    1x  Accelerator pump lever at throttle shaft
    1x  Knurled Pivot Pin at the Accelerator Pump
    1x  Throttle Return Spring


The following are NOT in this Kit, but may need replacing:

    - Throttle Plates (edge wear of plates is common)
        sku# 901.100.965.00 for 40mm
        Check that you don't need larger plates due to wear of bore.

    - Accelerator pump rod assembly (left and right)
         sku# 61287.003, and 61287.002

    - Brass floats that are collapsed in, corroded, leaky
         sku # 41015.007 (plastic)

    - Jets that are deformed or twisted from over-tightening and age
         See our Weber Jet Packages

    - Auxiliary boosters and chokes with damaged or modified surfaces

    - Throttle shafts that are worn to 7.95mm or less, or heavily scored

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of OEM and aftermarket parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. 

Reviews and Ratings:

• 1965 Porsche 911
• 1967 Porsche 911
• 1968 Porsche 911
• 1969 Porsche 911
• 1970 Porsche 911
• 1972 Porsche 911
• 1973 Porsche 911
• 1974 Porsche 911
• 1975 Porsche 911
• 1976 Porsche 911
• 1977 Porsche 911
• 1985 Porsche 911 Carrera
• 1986 Porsche 911 Carrera
• 1987 Porsche 911 Carrera
• 1988 Porsche 911 Carrera
• 1989 Porsche 911 Carrera
• 1978 Porsche 911SC
• 1979 Porsche 911SC
• 1980 Porsche 911SC
• 1981 Porsche 911SC
• 1982 Porsche 911SC
• 1983 Porsche 911SC
• 1970 Porsche 914/6
• 1971 Porsche 914/6
• 1972 Porsche 914/6
• 1973 Porsche 914/6
• 1974 Porsche 914/6
• 1975 Porsche 914/6
• 1976 Porsche 914/6

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.