1985 Porsche 911 Carrera Bushing Set for Rear Torsion Bar, Soft

Product Description:

Rear torsion bar rubber bushing set, Soft
These bushings are made of a much softer material (Shore "A 55") than the original Porsche® bushings and are fitted to the rear torsion bar swing plate. These will produce a very soft ride in the rear of the car. We recommend these bushings over the polyurethane ones.

The original bushings were vulcanized to the arm, and the best way to remove them is to heat the arm using a propane torch to melt the bond between arm and bushing. Be careful not to apply too much heat; use just enough to melt the bushing bond. At no point should any metal be glowing or showing signs of a color change. If you are not comfortable with this method please take your vehicle to a licensed repair shop for this service.

For 911 / 912 models 1968 to 1983.
Also for 1967 models starting from VINs 0307325 and 0354938.

Manufacturer Information:

URO line of products to fit Porsche®
This aftermarket brand is covering more and more Porsche parts, and because they offer a cheaper part, we offer this brand to be competitive with the market.  However, if we feel the part will not work, we will not carry it.

Reviews and Ratings:

• 1967 Porsche 911
• 1968 Porsche 911
• 1969 Porsche 911
• 1970 Porsche 911
• 1972 Porsche 911
• 1973 Porsche 911
• 1974 Porsche 911
• 1975 Porsche 911
• 1976 Porsche 911
• 1977 Porsche 911
• 1985 Porsche 911 Carrera
• 1986 Porsche 911 Carrera
• 1987 Porsche 911 Carrera
• 1988 Porsche 911 Carrera
• 1989 Porsche 911 Carrera
• 1978 Porsche 911SC
• 1979 Porsche 911SC
• 1980 Porsche 911SC
• 1981 Porsche 911SC
• 1982 Porsche 911SC
• 1983 Porsche 911SC
• 1969 Porsche 912
• 1976 Porsche 912E
• 1975 Porsche 930
• 1976 Porsche 930
• 1977 Porsche 930
• 1978 Porsche 930
• 1979 Porsche 930
• 1980 Porsche 930
• 1981 Porsche 930
• 1982 Porsche 930
• 1983 Porsche 930
• 1984 Porsche 930
• 1985 Porsche 930
• 1986 Porsche 930
• 1987 Porsche 930
• 1988 Porsche 930
• 1989 Porsche 930

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.