1974 Porsche 911 Restoration of Your Ignition Distributor, 2.7L 911/S 1974-75

Product Description:

Restoration Service for YOUR Bosch® Distributor
Send your distributor to us for restoration.
No time? See "Related Products" on this page for new distributor option.

Send us your Bosch model 0231.184.001 Ignition distributor for restoration. This distributor is used on 1974-75 Porsche 911S models. Check the outside case of your distributor for the Bosch number and verify your Engine Code as one of the following: 911/41, 42, 43, 44, 45, 46, 47, 48, 49, 81, 82, 84, 86, 89, 92, 93  

When you send us your distributor, it will be completely disassembled, media blasted, and polished. All new bushings and shims are installed, along with a new spring package. We ensure that vertical and lateral play are within appropriate levels for proper operation and the prevention of excessive wear. The service also includes new cap, rotor, points, and seals. A free download of our technical service bulletin for Porsche CDI ignition systems is included as well.

Your rebuilt unit is tested on a Sun machine and adjusted until it operates within factory specs. Test results are printed and included with the unit. The restored distributor ships ready to install and set timing.

If you would like new cap hold-down clips, see 901.602.965.00. If you want us to replace your pinion gear, we have them available as well.

This is a thorough restoration and we will need your distributor for about 4-7 weeks to complete the work. Turnaround times vary based on condition of all the distributor’s components and shop workload.

Please Note:  The vacuum advance unit is not part of the build price, and you will be contacted if there is a problem with your advance unit.  Not all distributor cores are rebuildable.  Damaged distributor cores may require additional machining and/or parts not included in this service; if that is the case we will let you know.

Please send your well packed distributor, with your online order number on the outside of the box, to:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of OEM and aftermarket parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. 

Reviews and Ratings:

• 1974 Porsche 911
• 1975 Porsche 911

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.