1973 Porsche 911 Distributor Rebuild Kit, 169 Series 911S, without Cap/Rotor

Product Description:

911 Distributor Rebuild Kit
Excludes cap and rotor.

Due to the high and escalating cost of caps & rotors, we offer this kit without cap or rotor. This lets you choose your own brand of cap and rotor, or use ones that you already have.

This kit is for rebuilding 911S distributors in the Bosch 0231.169 range.
Will also work with the 2.7L RS with 169 series distributors.
The number stamped on your distributor should begin with 0 231 169

Kit contains weight washers, various size shims to get the up-down play to .01 to .05 mm, a brass top shim, new advance primary and secondary springs, a new gear pin and O-ring. Also includes fresh hardware, points and felt dot.

New cap hold-down clips for this distributor are available; please see part number 901.602.965.00. We carry replacement drive gears as well.

This kit is meant for the professional with skill and understanding of the distributor function. Having a distributor machine to run up the distributor before installation is a must. Distributors that are improperly rebuilt and set up can cause damage to your engine. 

Distributor rebuild instructions and/or diagrams are not included. If you feel you need instructions or lack the necessary tools, please send your distributor in to us for a restoration service.

We do not offer partial kits, but we do have many individual parts for Bosch and Marelli distributors used on Porsche models.

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of OEM and aftermarket parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. 

Reviews and Ratings:

• 1972 Porsche 911
• 1973 Porsche 911

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.