1972 Porsche 911 Carburetor Gasket Kit, IDA/IDS

Product Description:

Weber IDA IDS Gasket Kit
Contains the gaskets for one Weber 3-series carburetor.  
Suitable for a quick carb clean out, not a major overhaul. 
Sold per each, one kit per carburetor.

If doing a full overhaul, see our Master Gasket Kit for Webers. The Master Kit includes 40-50 more parts including additional seals, hardware, teflon bushings, and needles & seats.


We also recommend replacing the following during a full overhaul:

Throttle Plates (edge wear of plates is common)
        sku# 901.100.965.00 for 40mm
        Check that you don't need larger plates due to wear of bore.
   
   Plugs for Needle & Seats (common source of leaks)
         sku# 901.100.801.00
   
   Fuel Inlet Strainers
         sku# 901.100.808.00
   
   Float Bowl Plugs (they easily snap when old, over-tightened)
         sku# 901.100.806.00

   Accelerator pump lever (“ear” attached to throttle rod)
         sku# 45027.007

   Accelerator pump rod assembly (left and right)
         sku# 61287.003, and 61287.002

   Accelerator pump pivot pin
         sku# 32486.000

   Mixture Screws and Screw Springs
         sku# 64750.003 and 47600.007


Finally, be sure to check for the following and replace if needed:

   Brass floats that are collapsed in, corroded, leaky
   Throttle shafts that are worn to 7.95mm or less, or heavily scored
   Auxiliary boosters and chokes with damaged or modified surfaces
   Jets that are deformed or twisted from over-tightening and age
   Corroded or twisted main jet holders

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of OEM and aftermarket parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. 

Reviews and Ratings:

• 1965 Porsche 911
• 1967 Porsche 911
• 1968 Porsche 911
• 1969 Porsche 911
• 1970 Porsche 911
• 1972 Porsche 911
• 1973 Porsche 911
• 1974 Porsche 911
• 1975 Porsche 911
• 1976 Porsche 911
• 1977 Porsche 911
• 1985 Porsche 911 Carrera
• 1986 Porsche 911 Carrera
• 1987 Porsche 911 Carrera
• 1988 Porsche 911 Carrera
• 1989 Porsche 911 Carrera
• 1978 Porsche 911SC
• 1979 Porsche 911SC
• 1980 Porsche 911SC
• 1981 Porsche 911SC
• 1982 Porsche 911SC
• 1983 Porsche 911SC
• 1970 Porsche 914/6
• 1971 Porsche 914/6
• 1972 Porsche 914/6
• 1973 Porsche 914/6
• 1974 Porsche 914/6
• 1975 Porsche 914/6
• 1976 Porsche 914/6

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.