Restoration of Your Ignition Distributor, Cast Iron “001”

Product Description:

Restoration Service for YOUR Bosch® Distributor
For Porsche®  911 Normal / 911T from 1965 to 1968.
Send your Bosch 0.231.159.001 distributor to us for restoration.
No time? See "Related Products" on this page for new distributor option.

When you send your Bosch 0.231.159.001 ignition distributor to us, it will be completely disassembled, thoroughly cleaned and media blasted. New bushings, sliding surface, and shims are installed, along with a new spring package. The rebuild also includes a new cap, rotor, points, condenser, and shaft seal. Cap color as of early 2021 is red, not brown.

If you would also like new cap hold-down clips, please add two of our small-sized clips, part number 901.602.965.00, to your order. We also have replacement drive gears available if needed.

Vertical and lateral play are set to within acceptable limits, and we use a Sun machine to ensure the distributor is performing to factory specifications. Test results / curves are printed and included in the box, and your distributor is shipped back ready to install and set timing.

This is a thorough restoration, and we will need your distributor for approximately 4-7 weeks. Turnaround times vary based on shop workload and the condition of all components.
 
Please send your well packed distributor, with your online order number on the the outside of the box, to:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of OEM and aftermarket parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. 

Reviews and Ratings:

• 1965 Porsche 911
• 1967 Porsche 911
• 1968 Porsche 911

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.