1967 Porsche 911 Restoration of Your Ignition Distributor, Cast Iron “002”

Product Description:

Restoration Service for YOUR Bosch® 002 911S Ignition Distributor
Send your distributor to us for restoration.
No time? See "Related Products" on this page for new distributor option.

This is a restoration service for your ignition distributor, Bosch® part number 0.231.159.002, used on Porsche® 911S models.

Your ignition distributor will be completely disassembled, media blasted and polished. All new bushings, sliding surface, and shim kit are installed, along with a new spring package. This restoration also includes a new cap, rotor, points, condenser, and shaft seal. The distributor is rebuilt to factory specifications. Testing is performed on our Sun tester, and the actual results and curves are recorded and included. Your restored unit is ready to install and set timing upon arrival. 

If you would like new cap hold-down clips, please add two of part number 901.602.965.00 to your order. We also have new drive gears available if needed.

This is a thorough restoration that takes about 4-7 weeks on average. Actual turnaround times vary with shop workload and the condition of the distributor‘s parts. Distributors with a high degree of damage or with missing parts may not be rebuildable, or may require additional labor and parts beyond the scope of this service. If that is the case, we will contact you.

Please send in your well packed distributor with your online order number on the outside of the box, to: 

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of OEM and aftermarket parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. 

Reviews and Ratings:

• 1965 Porsche 911
• 1967 Porsche 911
• 1968 Porsche 911

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.