1963 Porsche 356C Rear Torsion Bar Set, 356 C/SC, Short

Product Description:

Torsion Bar Set, "Short"
Special Order Only.
Typically ships in 7-10 days.

These are the shorter bars at 553mm (21 3/4") in length.
For Porsche® 356 C/SC models that don't have helper springs.
On the ends, these have a tooth count of 40 and 44.
Won't fit 356 A and B, which require the longer bars.

If you have a helper spring under the transmission bell housing of your C / SC, you need the longer bars instead of these. We strongly recommend that you pull your existing bars and measure their length before ordering.

The stock diameter was 23mm, but they have been discontinued at Porsche. Partsklassik's founders have installed these 26 mm bars for the last 20 years, including on their own cars. 

Sold per set of two.
Size is 26mm diameter, 21 3/4 inches in length.
Color / appearance may vary from photo.
Special order item; not returnable except for warranty.

Manufacturer Information:

Aftermarket
Our founders have worked on Porsche cars for decades. They've tried most of our aftermarket products first hand on real cars. Some parts are no longer made by an O.E.M company, or the price difference between genuine and aftermarket has become so large that it makes sense to take the savings. If you have any questions about an aftermarket product, please contact us.

Reviews and Ratings:

• 1963 Porsche 356C
• 1964 Porsche 356C
• 1964 Porsche 356SC
• 1965 Porsche 356SC

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.