1963 Porsche 356B Exchange Your Rocker Arm Assembly - Exhaust Long (send cores first)

Product Description:

Send Your Long Exhaust Rocker Arm and Shaft for Exchange
This is an exchange; Core must be received first.

Rocker arm tips are surfaced and rocker bores are bored .10 mm oversize. Rocker shafts are surface ground then hard chrome plated and finished by centerless grinding to match the oversize rocker bore. These parts are sold as a kit and on an exchange basis; please send us your components first.

Sometimes, not all parts can be re-built. The most common issue is that the rocker shafts can crack. If this is the case, we will provide shaft cores for an additional $25.00 each if available. 

These parts fit 356 B/C/SC and 912 models using aluminum rocker stands. This assembly does not include valve adjusting post or lock nut.

Please Note: the center aluminum stand for the intake rockers will need to be reamed to 16.05mm to accommodate the increased shaft size.

Preparation and shipment:
Send us the arms and shafts only, no hardware please!
Remove spacers / collars from shafts, and store them.
Remove the screws and nuts from each arm, and store them also.
If these parts are not removed, extra labor charges will apply.

Send just the loose arms and shafts to us at:

Partsklassik
827 State Route 82
Suite 10251
Hopewell Junction, NY 12533

Manufacturer Information:

Partsklassik
Partsklassik was founded by a Porsche®-trained mechanic with decades of repair and restoration experience. We are a parts and components restorer, as well as a manufacturer of previously unavailable parts for vintage and classic Porsche® vehicles. 

We also carry thousands of OEM and aftermarket parts spanning all systems of the air cooled Porsche® models, including the 356, 911, 912, 914, and 930. We continuously add new products and services to meet the needs of the vintage Porsche® enthusiast. 

Reviews and Ratings:

1 Customer Review(s)

5 Star

1  (100%)

4 Star

0  (0%)

3 Star

0  (0%)

2 Star

0  (0%)

1 Star

0  (0%)

Please login first to write a review.

Overall

Value

Performance

Amazing company and outstanding folks. Thank you Kurt for all your help!! These rebuilt rocker arm assembly was perfect. I had them all done with Kurt and will do so again in any future projects. Highly recommended.

Reviewed by Jaime  D

11/12/2018 9:34:56 AM

• 1960 Porsche 356B
• 1961 Porsche 356B
• 1962 Porsche 356B
• 1963 Porsche 356B
• 1963 Porsche 356C
• 1964 Porsche 356C
• 1964 Porsche 356SC
• 1965 Porsche 356SC
• 1965 Porsche 912
• 1966 Porsche 912
• 1967 Porsche 912
• 1968 Porsche 912
• 1969 Porsche 912

All returns require pre-approval. All returns are subject to a 25% restocking fee, with the exception of approved warranty returns, or if we ship a different part number than ordered. We do not accept returns after 30 days.

Inspect your order immediately when it arrives. We must be notified within 5 days if there are any missing, damaged, or incorrect parts.

Returns (except warranty) won't be accepted if the part:
 - Has been installed, used, damaged, is dirty or incomplete
 - Is not sellable as new
 - Arrived in sealed packaging that has been opened
 - Is an electrical part, a distributor spring, a custom or cut-to-length item, or a Special Order
 - Was purchased more than 30 days earlier

Parts must be returned properly padded in a sturdy cardboard box. Returns sent in envelopes will be refused. Items damaged in transit to us cannot be refunded. All returns must be shipped prepaid.